Commercial glass display cases for restaurants, cold storage refrigeration for frozen foods, walk in coolers, refrigerators, walkin freezers, ice machines and makers, beer and liquor facility equipment by Walk In Cool
|
STANDARD PANEL:
All wall & ceiling Panels are
24 Gauge embossed
aluminum finished in original mill or painted color
in target, thickness,with permanent lamination to a
solid core
rigid 4" expanded, Self-extinguishing
Polystyrene or urethane insulation.
Optional #304
20 guage stainless steel is available upon request.
Polystyrene is the standard insulation
for coolers.
It is the most cost efficient insulation for a cooler
application. Polystyrene will not absorb moisture,
and moisture
reduces its insulation capability.
All panels have a
tongue-in-groove, interlocking
design with N.S.F. approved edge gaskets,
resulting
in an airtight StructurePanels are provided with a
male
and female cam-locking devise set into exact
aligned positions
around the perimeter. The male
locks are located on the tongue
edges and the
female on the groove.
Design that is permanently bonded to the panel behind the metal skins to ensure a quick
and tight seal.
All standard 7 ft. wall panels have a minimum of three (3) cam locks, each designed
to withstand 1,400 pounds of pull test. Buck openings are framed in ABS plastic trim.
Indoor floorless walk-ins are supplied with precut, mitered and numbered vinyl floor
screeds. This modular design allows for easy assembly and disassembly and one piece
corners ensure structural integrity.
COOLER: All manufactured wall & ceiling panels
shall consist of rigid 4" self-extinguishing expanded polystyrene, (S.E.), K factor of .22 at 70 degrees.
Density 1-1/4 lbs. Per cubic foot, rate of vapor
transmission less than 1.7 perms. Insulation core
shall have U.L. 25 flame spread rating with average
smoke rating less than 450.
Efficiency Rating / R-Value = 28.
FREEZER: All manufactured panels shall consist
of 4" expanded rigid Poly Urethane-Isocyanurate,
self-extracting (S.E.), K factor of .11 at 70 degrees.
Density 2 lbs. Per cubit foot, rate of vapor
transmission less than 2 perms. Insulation core shall
have U.L. 25 flame spread rating with average smoke
rating less than 150.
Efficiency Rating / R-Value = 34
The doors are of the same thickness and the same
completion as that of the panels. The meetings are
constructed of totally replaceable neoprene rubber.
The standard size of the Self Closing doors is of
34" x 78". Wipers and perimeter gaskets are fully
replaceable, made from a rubberized flexible one piece
section, fitted with magnetic strips for a perfect seal
every time.
The complete door section includes a vapor
proof light fixture, Outside switch with pilot light and thermometer. The heavy duty cam lift hinges are made
of polished aluminum, chrome plated door latch with
adjustable strike. Interior safety release. Freezer door
frames are fitted with U.L approved defrost cables on
all four sides.
Optional diamond tread kick plates and window are
available upon request.
setInterval("flashit()", speed)
//-->
800 884 2204
800 884 2204
800 884 2204 |
